Видео

Does the car need an alignment after doing the lowering. My problem is I put a Zr1 replica front end on my C7 and it’s too low. So I’m going to raise my car up an inch. Great video and explanation! Thanks Jim. 12:10

I wonder how secure is that wing at high speeds..... Clean grand sport, I been thinking on swapping the front on a Z06, front bumper and carbon fiber hood, and of course the side bents.

I know this video is 4 years old but hoping you will still respond. In the track mode display I find it odd that I cannot select engine coolant temp on the 4 small engine gauge displays. I have a Z06 so I do not have coolant temp on the right side below the fuel display, I have supercharger boost. Coolant temp seems to only be selectable as a single display in the middle of the cluster. Am I missing something? What I want are the 4 small gauges with oil press, oil temp, trans temp and coolant temp. Can configure the first 3 but not the coolant temp.

corsa 100 precent

Where did u order that flint splitter and winglets

You were short shifting. Take to redline.

Sound check in a neighborhood street??? Ha ha making some friends with the neighbors.

I zoned in based on the cold start recipients. First Responders stand up!!!!

God I hate Borla lol

What a wimp! Kick it to 200 mph, mine, no problems!

Hey! so if this piece is cracked, it can cause leaking inside the car?

The only brake job that I've ever seen that was even easier was my 72 C3 back in the day. Now I know how easy it'll be to do my C7 when the time comes. 👍

Nice video! How long did the actual install take you (minus the camera work)?

Why the FUCK did you compare this with a modern Porsche? And not the same year equivalent Porsche as the Corvette????

Oil is already going pass the MAF unless it's an older car. The crank case is vented in to the air intake. That is why people use catch cans.

What happens to your channel

What happen to your channel. U haven’t posted anything

Great video, great presentation and beautiful C7!

Love AWE! 😊

I did the brake pads with the Z26 pads Friday 7/19/2024. I had to use a floor jack for each wheel as I don't have a lift. I also washed each wheel. It took me 2 hours and 45 minutes to complete. I hope my brake dust sorrows are behind me now. Thanks for the video. It was a pretty easy job.

My Fiesta ST 150 had a cracked intake tube on the original setup. The rest of the intake System is also an engine Cover, so it sits on top of the engine. It's restrictive by itself and this tube by itself costs around 300€. Insane. I bought an oiled cone filter and after 2000km after inspecting, the inside of the intake pipe was bone dry. No oil went inside. It was supposed to be lightly oiled, not soaked in oil. And it all costed a third of the price of the original part.

What a fantastic video! Simple and educational. Also, kudos for linking the brake parts. I can't wait to get the parts and install them. Well done.

Looks great and I will be installing.

many thanks,,,i needed that baad

Sooooo, when are you coming back, Scott? This channel is too good for it to stay dormant!

My dream car

I have used K&N filters for decades. I clean and re-oil them on a pretty aggressive schedule, but that is me. I have never had an issue with a MAF sensor because I actually followed the instructions and do not believe that more of something is better. The engineers who designed these products know more than I do so I defer to their wisdom. It works every time. I have never had an issue related to wear either. My understanding is the vibration of the engine optimizes the filtering of these filters.

Washing your hands and DO NOT get right in someone’s face you will not get the Flu aka C0VID.

God what a ugly exhaust to start.🤮🤢

You transpose the dextron fluid part number when you say it. The last two numbers are 34 not 43.

I got the AWE touring installed this past weekend, sounds fantastic! I do have a question, there is drone in the V4 mode, wondering if there is a way to keep it out of V4 mode.. Z mode doesn't keep it out of V4 mode as well.. otherwise this exhaust is the best i've heard!!

What up Scott, I gotta question, and I need an answer ASAP... Would a 2" Kooks Header match up with the AWE Xpipe. I've been told i NOW have to buy the actual Kooks Xpipe. Is there a way around this, Or am I gonna have to buy another Xpipe??? I don't wanna buy twice what I already have, Help me out Bruh...🫡

Great, informative video - well done! I’ve had my 2017 Z06 for about 3 months now so I’m still playing with my gauge preferences, so this was good. I tend to default to the Sport setting with the center speedometer, but like to play around with the settings.

Thank you from a trucker

Any drone? I have the borla X-pipe. By far the best mod I’ve done. I could feel the better throttle response and power gain over stock. I think that’s where most of the power gain would come from between the x-pipe and axel back. I’m just curious how it will be paired with the AWE touring axel back for drone? Looking for a bit more sound but not too crazy…

No slip lock additive? If you reverse and hear clunking. It's just the clutch packs. Change your diff oil. (these cars are gettin 20 years old, change all fluids) Also Once the differential fluid has been changed, the vehicle must be driven in 8-10 tight figure eight maneuvers to heat the fluid and allow the fluid to be worked into the clutch plates.

Hey guys can you put that wing on a c6 corvette.

One of the best reviews on the AWE exhaust. I already have it on my Camaro ZL1!! I will be putting the AWE on my new eray!!!🎉. P.S - I totally agree on the chrome tips vs black. The chrome tips make a statement and tastefully stand out!!!

Nice tip!!

How much lower do you sit in these seats vs stock?

How much lower do you sit in these seats vs stock?

Great video! How are they holding up? I need to change my original Brembos and consider these. Thanks

It’s paper vs oiled not dry vs oiled. Dry filters are different and where the industry has shifted more too.

looks the same but now needs an alignment

Nice video - I’ve got a C7 Z06 I just bought and am looking to add an x-pipe. Keep up the good work, and I love that you include your daughter in the video - raising her up right!

Cool love the little one working on the C7 🏁

It looks like you are in Pa,? Would you like to work on my C6 installing the same parts?

I know this is 4 years old, but it sure helped today. Before applying the power of persuasion, hammer, to the back of the pad, I thought it was best to consult the internet! On my first rear brake I had put the pad with the “squealer” on, on the inside and it wasn’t going in smoothly…Thank You for the video, it saved me from making a dumb mistake!

Does every manual c7 even base have rev match?

I’ve been debating on what brand exhaust to get after watching one of your other videos a week ago with your daughter installing that X pipe in the touring exhaust I like it so much. I immediately ordered that system. Can’t wait to put it on. Your videos are great. Look forward to seeing more.